Lp Conversion Instructions - Lopi Greenfield GSR2 Manual

Optional Equipment

LP Conversion Instructions

The GSR Stepper Motor Kit is required for converting this appliance to LP (4-pack = 94400999, single = 250-01463).
The kit contains the stepper motor (regulator) and torx wrench. The burner orifices are shipped with the appliance.
WARNING
This conversion kit shall be installed by a qualified service agency in accordance with the
manufacturer's instructions and all applicable codes and requirements of the authority having
jurisdiction. If the information in these instructions are not followed exactly, a fire, explosion or
production of carbon monoxide may result causing property damage, personal injury or loss of
life. The qualified service agency is responsible for the proper installation of this kit. The
installation is not proper and complete until the operation of the converted appliance is checked
as specified in the manufacturer's instructions supplied with the kit.
Convert the appliance prior to installing the gas line to ensure proper gas use.
1 Access the firebox.
2 Remove the side ember trays. Grasp the burner with both hands and lift it straight up and out of the
firebox.
NOTE: When re-installing, make sure the flat edges of the ember trays face inwards.
© Travis Industries
(for qualified installers only)
2/23/18 - 1479 Greenfield GSR2-Aust
53