Maintaining Your Stove's Appearance - Lopi Greenfield GSR2 Manual

Maintenance
DANGER HIGH VOLTAGE: Disconnect power before attempting maintenance or repair.

Maintaining Your Stove's Appearance

Painted Surfaces
• Painted surfaces should be cleaned with a duster. If scratches occur, lightly sand the area with fine sandpaper.
Clean the area and, with the stove cool, apply one or two thin coats of stove paint to the area (mask the area to
avoid overspray). Allow the stove to dry, then turn the stove on to cure the paint (1 hour on medium).
Enamel Surfaces
• Use only soft cloth and water to clean enamel surfaces. To fix chips in the enamel, follow the directions below:
1) Let the stove cool. Clean the area thoroughly.
2) Shake the Travis Enamel Touch-Up thoroughly. Apply to the damaged area.
Patina Surfaces
• The patina finish is a "living" color and will age and antique over time. Some portions of the finish may become
slightly dull in appearance, especially over the top where it becomes hot. This is normal. The only cleaning we
recommend is a light dusting when the appliance is cool. DO NOT USE ANY LIQUID, CLEANER, OR
ABRASIVES ON THIS FINISH.
Front Glass
• Clean the glass with soap and water (do not use abrasive cleaners). Glass removal instructions are on page 27.
Side Glass
The interior of the side glass is cleaned by removing the front glass (page 27) and cleaning the glass from the
inside (use soap and water – do not use abrasive cleaners). The exterior of the side glass may be cleaned with
compressed air.
© Travis Industries
(for qualified service personnel only)
2/23/18 - 1479 Greenfield GSR2-Aust
45