de Set up and connect
4.6 Align the device
To reduce noise and vibrations and to
prevent the device from wandering,
align the device correctly.
Note: Note the information on
security
→
page 4 and avoid damage to property.
the → Page 11, to use your device
safely.
Loosen the lock nuts clockwise
1.
with a 17 mm spanner.
18th
To align the device, turn the
2.
device feet. Check the alignment
with a spirit level.
All device feet must be firmly on
the floor.
Tighten the lock nuts hand-tight
3.
against the housing with an SW17
wrench.
Hold the device base firmly and
do not adjust the height.
4.7 Connect the device
electrically
Note: Note the information on
security
→
page 4 and avoid damage to property.
the → Page 11, to use your device
safely.