Refer to the Digital User's Guide for more information. Index 1 Safety..........4 7 Display ........21 1.1 General instructions ....4 8 Buttons ........24 1.2 Destination of the device rate ........4 9 Programs ........ 26 1.3 Restriction of users ..4 10 Accessories........
Page 3
15 Basic Settings ....35 15.1 Overview of the basic settings ........35 15.2 Changing basic settings..36 16 Cleaning and maintenance ..36 16.1 Cleaning the drum ....36 16.2 Cleaning the detergent drawer........36 16.3 Cleaning the drain pump....37 17 Troubleshooting ....
NLSafety 1 Safety Observe the following safety instructions. 1.1 General instructions sRead this manual carefully. sKeep the operating instructions and product information for future reference. for use or for subsequent owners. sDo not connect the device in case of transport damage. 1.2 Destination of the device Only use the device: sto wash machine-safe textiles and wool by hand...
SafetyNL 1.4 Secure installation Observe the safety regulations when installing the device. WARNING ‒ Risk of electric shock! Improper installations are dangerous. ▶ Only connect and use the device in accordance with the information on the type plate. ▶ Only connect the device to a mains supply with alternating current via a properly installed earthing socket.
Page 6
NLSafety ▶ Use only manufacturer-approved adapters and power cords. ▶ If the power cord is too short and a longer power cord is not available, contact an electrical retailer to adjust the home installation. WARNING ‒ Risk of injury! The heavy weight of the device can cause injuries when lifted. ▶...
SafetyNL There is a tripping hazard with incorrectly laid hoses and mains connection cables. ▶ Lay the hoses and connection cables in such a way that they cannot be tripped over. If the appliance is moved by protruding parts, such as the loading door, the parts can break off.
Page 8
NLSafety WARNING ‒ Risk of health hazard! Children can lock themselves in the appliance and endanger their lives. ▶ Do not install the appliance behind a door that blocks or prevents the opening of the appliance door. ▶ In the case of discarded appliances, remove the plug of the mains cable from the socket, then cut the mains cable and damage the lock of the appliance door so that the appliance door no longer closes.
SafetyNL Reaching into the rotating drum can cause injury to hands. ▶ Wait for the drum to come to a complete stop before reaching inside the drum with your hand. CAUTION ‒ Risk of burns! The soap gets hot when washing at high temperatures. ▶...
Page 10
NLSafety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use original spare parts and original accessories from the manufacturer. WARNING ‒ Risk of poisoning! Toxic fumes can be generated when cleaning agents containing solvents are used.
Avoid material damageNL Make sure that the thread length ▶ 2 Material damage on the connection to the water avoid tap is at least 10 mm. Follow this instruction to avoid Water pressure that is too low or too high can material damage and damage to the interfere with the appliance function.
NLEnvironmental protection and saving ▶ Remove all detergent residues, spray Reduce washing temperature for mist residues or residues immediately lightly and normally soiled laundry. upon contact with the appliance. aAt low temperatures, it consumes device less energy. For light to normal soiling, lower 3 Environmental protection and temperatures than those stated on...
Set up and connectNL Remark:The device has been checked 4 Set up and connect at the factory for correct operation. Water stains may remain in the device. The stains disappear after the 4.1 Unpacking device first wash. PAY ATTENTION! Objects that remain in the drum and The delivery consists of: s that are not intended for use with the Washing machine...
NLSet up and connect If the device is tilted more than 40°, 4.4 Removing transport locks residual water can run out of the device and cause material damage. The device is secured for transport Carefully tilt the device. ▶ with transport locks at the rear of the Transport the device upright.
Set up and connectNL Push the 4 cover caps down. Remove the mains connection cable from the holder. Remove the 4 sleeves. 4.5 Connecting device Connect water supply hose Connect the water supply hose to the appliance. Install the 4 cover caps. Connect the water inlet hose to the tap (26.4 mm = 3/4").
NLSet up and connect Open the tap carefully and check 4.6 Adjusting the device that the connections are tight. To reduce noises and vibrations and to prevent the device from walking, place the device horizontally. Water drainage connection types The information will help you connect this Loosen the lock nuts with a SW17 appliance to the water outlet.
Set up and connectNL Tighten the lock nuts against the housing with an open-end wrench SW17 hand-tight. Hold the appliance foot while doing so and do not adjust the height. 4.7 Connecting the appliance electrically Remark:Your home electrical installation for this appliance must comply with local legal and safety regulations and must include an earth leakage circuit breaker.
NLGetting to know your device 5 Getting to know your device 5.1 Device Here you will find an overview of the components of your device. Depending on the device type, details in the picture may differ, e.g. the color the vor Service valve n pump Transport protections →...
Getting to know your deviceNL Dosing aid for liquid detergent → "Insert the dosing aid for liquid detergent", Page 32 Detergent compartment II: detergent for the main wash Detergent dispenser: fabric softener Detergent compartment I: detergent for prewash 5.3 Control panel You can set all functions of your device and obtain information about the operating status via the control panel.
usage Fill powder detergent into 6 Before first use compartment II. B prepare the device for use use. 6.1 Starting a wash cycle without laundry Your device has been thoroughly checked before leaving the factory. To remove any residual water, wash without any laundry the first time.
DisplayNL 7 Display The display shows the current setting values, options or information texts. Example display indication name Display More information 0:40 Approximate expected program duration Program duration / remaining time of or time remaining in the program. the program →...
Page 22
NLDisplay name Display More information Wash Program status To rinse Program status Centrifuge Program status Program end Program status Child lock slights up: the child lock is activated. s flashes: the child lock is activated and the device was operated. →...
Page 23
DisplayNL name Display More information Door slights up: the door is locked and can not be opened. sflashes: the door is not closed. soff: the door is unlocked and can be den open. Crane sNo water pressure. sThe water pressure is too low. E:35 / -10 Error code, error indication, signal.
Page 24
NLTests 8 Keys The selection of the program settings depends on the program set. Knob Choice More information Start/Reload sstart Start, cancel or pause program. (Start/Reload) sCancel spause SpeedPerfect sactivate Activate or deactivate reduced program duration. sdeactivate Remark:The energy consumption is higher.
Page 25
TestsNL Knob Choice More information sactivate Activate or deactivate washing with less Less Ironing crease. sdeactivate (Anti wrinkle) To reduce creasing in the laundry, the spin process and spin speed are adjusted. The laundry is so damp after washing that it hangs out well on the washing line.
NLPrograms 9 Programs Remark:The care labels on the laundry give you additional information on program selection. Max. Program Description bela- thing (kg) Cotton Wash hard-wearing cotton, linen and blended fabrics. Also suitable as a shortened program for normally soiled laundry if you activate SpeedPerfect. Program setting: smax.
Page 27
ProgramsNL Max. Program Description bela- thing (kg) Fast mix Wash textiles made of cotton, linen, synthetic materials and blended fabrics. Suitable for lightly soiled laundry. Program setting: smax. 60 °C smax. 1400 rpm Delicate/Silk Wash delicate, washable textiles made of silk, viscose and synthetics.
Page 28
NLPrograms Max. Program Description bela- thing (kg) smax. 1400 rpm Wash sports and leisure textiles made of synthetic, Sport microfibre and fleece. Use a detergent for sports textiles. Do not use fabric softener. Tip:Wash heavily soiled laundry with the Easy- Care programme.
Page 29
ProgramsNL Max. Program Description bela- thing (kg) Halve the amount of detergent to avoid foaming. Do not use fabric softener. Do not use wool, delicate or liquid detergent. Remark:If you have not used a program with a temperature of 60 °C or higher for a long time, the drum cleaning indicator flashes as a reminder.
– Brush sand out of all covers and instructions by scanning the QR code pockets in the table of contents or on – Close duvet covers and www.bosch-home.com. pillowcases – Close zippers, Velcro fasteners, 11.1 Preparing the laundry hooks and eyes –...
QR code in the table of contents or on laundry together – do not rub in fresh stains, but www.bosch-home.com. dab off with soapy water 13.1 Switch on device – Unfold and loosen the laundry or...
NLService Place the dosing aid. 13.4 Filling the drum with laundry Remark:To avoid creasing, observe the maximum load of the programs. → "Programs", Page 26 Requirements sThe laundry is prepared and sorted. → "Laundry", Page 30 sThe drum is empty. Insert the detergent drawer.
ServiceNL Fold the dosing aid downwards and aThe display shows the program click into place. duration function ready in time. a After the program end, it shows display: "End". 13.9 Soaking laundry Remark:No additional detergent is needed. The soapy water is then used for washing.
NLChild lock At high temperature and high 14 Child Lock water level, the appliance door remains locked for safety reasons. Secure your device against unwanted operation via the controls. – Start the program at a high temperatureTo rinse. – Start the program at a high water 14.1 Activating child lock levelCentrifuge or select a suitable program for draining.
Basic settingsNL 15 Basic Settings You can configure the basic settings of your device according to your needs. 15.1 Overview of the basic settings Program- Description Basic setting Where the ling position Signal 0 (off) Adjust the volume of the signal 1 (soft) after the program has ended.
Carefully clean and maintain your appliance to ensure that it continues to work properly for a long time. Remark:You can find more information in the digital operating instructions by scanning the QR code in the table of contents or on www.bosch-home.co...
Cleaning and maintenanceNL Pull out the insert from bottom to Clean the opening for the detergent top. drawer. Clean and dry the detergent drawer Slide the detergent drawer into the and insert with water and a brush. appliance. 16.3 Cleaning the drain pump Clean the drain pump in the event of malfunctions, e.g.
Page 38
NLCleaning and maintenance Place a sufficiently large Press the stopper back on. container under the opening. Clamp the drain hose in the holder. Remove the drain hose from the holder. CAUTION - Risk of burns!The Cleaning the drain pump soap gets hot when washing at high Required:The drain pump is empty.
Page 39
Cleaning and maintenanceNL As there may still be residual Install the pump cover. water in the pump, carefully Check that the pump cover unscrew the lid. components are correctly Large impurities can cause the assembled. filter element to get stuck in the pump housing.
Page 40
NLCleaning and maintenance Before the next wash To prevent unused detergent from flowing into the drain during the next wash, run the programmeDrainoff after you have emptied the pump. Open the tap. Plug in the mains plug. Switch on the device. Pour one liter of water into compartment II.
TroubleshootingNL 17 Troubleshooting You can remedy minor faults on the device yourself. Before contacting customer service, please refer to the troubleshooting information. This way you avoid unnecessary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Only trained specialist personnel may carry out repairs on the device. ▶...
Page 42
NLTroubleshooting Cause and Troubleshooting Malfunction "E:36 / -10" Remove any unauthorized extensions from the ▶ water drain hose. → "Connecting the device", page 15 Pump cover is not fully screwed in. Make sure that the pump cover is screwed into the ▶...
Page 43
TroubleshootingNL Cause and Troubleshooting Malfunction Undervoltage can cause a program extension. flashes. No solution possible. burns. Temperature is too high. Wait for the temperature to drop. ▶ → "program cancel", Page 33 ▶ Water level is too high. Select a suitable program for draining. ▶...
Page 44
NLTroubleshooting Cause and Troubleshooting Malfunction Start/Reloadwas not pressed. Program does not start. Press Start/Reload. ▶ Door is not closed. Close the door. To start the program, press Start/Reload. Child lock is activated. → "Deactivate child lock", page 34 ▶ Finished inis activated. Check if Finished inis activated.
Page 45
TroubleshootingNL Cause and Troubleshooting Malfunction Detergent dosage is too high. Washing water is not pumped out. ▶ Immediate measure: mix a tablespoon of fabric softener with 0.5 l of water and pour this mixture into the left compartment (not for outdoor, sportswear and down textiles).
Page 46
NLTroubleshooting Cause and Troubleshooting Malfunction Remark:When loading, place large and small items of The program duration laundry together in the drum. Different sized laundry changes during the wash is more evenly distributed during the spin cycle. cycle. Foam control system provides an extra rinse when foaming is too high.
Page 47
TroubleshootingNL Cause and Troubleshooting Malfunction High spin speed Unbalance control system compensates for rental is not imbalance through reduced spin speed. reached. Redistribute the laundry in the drum. ▶ Remark:If possible, place large and small items of laundry together in the drum. Different sized laundry is more evenly distributed during the spin cycle.
Page 48
NLTroubleshooting Cause and Troubleshooting Malfunction wrinkling. Spin speed is too high. Set a lower spin speed for the next wash. ▶ The load quantity is too high. Reduce the load during the next wash. ▶ Inappropriate program set for the type of fabric. Select a suitable program for the type of fabric.
Page 49
TroubleshootingNL Cause and Troubleshooting Malfunction Spin result is Remark:If possible, place large and small items of not to satisfaction- laundry together in the drum. Different sized laundry is more evenly distributed during the spin cycle. ness. The laundry is too wet / too damp. Start the programCentrifuge.
→ "Start the wash cycle without information in the digital operating laundry", page 20 . instructions by scanning the QR code in the table of contents or on www.bosch-home.com. Close the tap. Water supply hose empty. Switch off the device ate out.
customer serviceNL 18.4 Disposal of your old chemical equipment (waste electrical and electronic appliance equipment - WEEE). Environmentally friendly disposal The directive sets the allows valuable raw materials to be framework for the take- reused. back valid in the EU and disposal of old appliances.
Page 52
NLcustomer service son the inside of the bottom holding valve. son the back of the device honeycomb. In order to quickly find your device data and the service telephone numbers, you can write down the data.
Consumption valuesNL 20 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The specified values for other programs asEco 40-60are only guide values and have been determined in accordance with the applicable standard EN60456. Pro- Program bela- Water-...
Page 54
NLTechnical data Maximum load 9.0 kg thing 220-240V, mains voltage 50-60 Hz 10 A Minimum input installation fuse Rated power 2300W gene Recorded Ver- sOff state: 0.15W be allowed to snon-disabled caved in position: 0.50 W sAt least: water pressure 100 kPa (1 bar) sMaximum:...
Page 56
Contact data of all countries are listed in the attached service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 Munich, GERMANY www.bosch-home.com A Bosch Company * 9001688744* 9001688744(020614)