Table of Contents
Advertisement
To adjust the device, turn the device
2.
feet. Check the horizontal
adjustment of the device with a
spirit level.
All device feet must be firmly on the
floor.
Tighten the lock nuts against the
3.
housing hand-tight using a SW17
open-end wrench.
Hold the appliance foot firmly
and do not adjust the height.
4.7 Connecting the device
electrically
Remark:Your domestic electrical
installation for this appliance must
comply with local legal and safety
regulations and
must be earth leakage
ten.
eagle contains-
Set up and connectNL
Insert the mains plug of the
1.
appliance's connecting cable into
a socket in the vicinity of the
appliance.
The connection data for the device
can be found in the technical data
→ Page 57 .
Check the mains plug for tightness.
2.
17
Advertisement
Table of Contents
