Table of Contents
Advertisement
Loosen and remove all screws of
2.
the 4 transport locks with a SW13
wrench.
Remove the power cord from the
3.
bracket.
Remove the 4 sleeves.
4.
Set up and connecten
Insert the 4 cover caps.
5.
Press down the 4 cover caps.
6.
4.5 Connecting the device
water inlet hose
connect
WARNING
Electric shock hazard!
The device contains live parts.
Touching live parts is dangerous.
Do not immerse the electric
▶
Aquastop valve in water.
A notice:Make sure that you connect
the device to a water supply with a
safety device against drinking water
contamination through backflow
(according to DIN EN 1717). The
connection valves/tap provided for
this are
15
Advertisement
Table of Contents
