Table of Contents
Advertisement
Remove the mains connection cable from
3.
the holder.
Remove the 4 sleeves.
4.
Install the 4 cover caps.
5.
Set up and connectNL
Slide the 4 cover caps downwards.
6.
Remark:To install the transport locks
in the machine, reverse these steps
in reverse order.
4.5 Connecting device
Connect water supply hose
WARNING
Risk of electric shock!
The device contains live parts.
Touching live parts is dangerous.
Do not immerse the electric
▶
Aquastop valve in water.
Connect the water inlet hose to the
1.
tap (26.4 mm = 3/4").
15
Advertisement
Table of Contents
