Table of Contents
Advertisement
RFID board
An RFID board may be included with healthcare models. It is located near the bottom of the chassis.
To remove the RFID board:
1.
Prepare the computer for disassembly (see
2.
Remove the rear port cover (see
3.
Remove the stand (see
4.
Remove the access panel (see
5.
Disconnect the cables from the board, remove the two Phillips screw that secure the board, and then
remove the board from the computer.
To install the RFID board, reverse the removal procedures.
32
Chapter 4 Removal and Replacement Procedures
Preparing to disassemble the computer on page
Removing the rear port cover on page
Stands on page
19).
Access panel on page
18).
20).
18).
Advertisement
Table of Contents
