4.
Lift the stand up (2), and then pull the stand hooks out of the computer (3).
Access panel
The computer has one main rear access panel that allows access to internal components.
To remove the access panel:
1.
Prepare the computer for disassembly (see
2.
Remove the rear port cover (see
3.
Remove the stand (see
4.
Pull up the notches of the access panel, and then lift the access panel off the computer.
To replace the access panel, reverse the removal procedures.
20
Chapter 4 Removal and Replacement Procedures
Preparing to disassemble the computer on page
Removing the rear port cover on page
Stands on page
19).
18).
18).