Cable Management - HP EliteOne 800 G4 Maintenance & Service Manual

23-inch all-in-one business pc
Table of Contents

Advertisement

Conductive foam
Conductive tabletop workstations with ground cord of one-megohm +/- 10% resistance
Static-dissipative table or floor mats with hard tie to ground
Field service kits
Static awareness labels
Wrist straps and footwear straps providing one-megohm +/- 10% resistance
Material handling packages
Conductive plastic bags
Conductive plastic tubes
Conductive tote boxes
Opaque shielding bags
Transparent metallized shielding bags
Transparent shielding tubes

Cable management

Always follow good cable management practices when working inside the computer.
Keep cables away from major heat sources like the heat sink.
Do not jam cables on top of expansion cards or memory modules. Printed circuit cards like these are not
designed to take excessive pressure on them.
Keep cables clear of sliding or moveable parts to prevent them from being cut or crimped when the parts
are moved.
When folding a flat ribbon cable, never fold to a sharp crease. Sharp creases may damage the wires.
Some flat ribbon cables come prefolded. Never change the folds on these cables.
Do not bend any cable sharply. A sharp bend can break the internal wires.
Always position the cables to lay properly by themselves.
Cable management
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eliteone 800 g4 healthcare edition

Table of Contents