Table of Contents
Advertisement
J
jumper settings
default settings (table), 3-3
EEPROM
configuration settings (figure), 3-6
power-on self-configuration status
(figure), 3-5
Ethernet power-on defaults (figure), 3-8
system CMOS (figure), E-7
trigger input termination, 3-5
VXIbus Slot 0/non-Slot 0, 3-4
K
keyboard connector
location and pinout (figure), D-4
problems with plugging in keyboards, E-2
signals (table), D-4
L
LabVIEW software, 1-3
LabWindows/CVI software, 1-3
LEDs on front panel
board access LEDs, C-3
common questions and answers, E-1
system startup cycle, C-2
VXI and PC status LEDs, 1-6
VXIbus interface status LEDs, C-1 to C-2
M
MANTIS custom ASIC, 1-5
manual. See documentation.
memory. See RAM.
MITE custom ASIC, 1-4 to 1-5
monitor. See also video interface.
booting for color, E-1
type to use with VXIpc-740, E-2
© National Instruments Corporation
N
NI-488.2 software kit, 1-3
O
ONLINE LED, 1-6, C-1, C-2
P
PC configuration, 3-7 to 3-8
Ethernet power-on defaults, 3-8
system CMOS, 3-7
PCI interrupts, B-1
PCMCIA interface
overview, 2-3
peripheral expansion (table), 1-7
peripheral expansion. See I/O expansion
boards.
peripherals overview (table), 1-6 to 1-7
physical specifications, A-2
plug-in boards. See I/O expansion boards.
Q
questions and answers about VXIpc 700
Series, E-1 to E-3
R
RAM
adding RAM, A-4, E-2
installed system RAM, 3-7
S
serial port
connector and signals, D-8 to D-9
peripheral expansion (table), 1-7
signals. See also connectors.
COM1 connector (table), D-8
Ethernet connector (table), D-7
I-3
Index
VXIpc 700 Series User Manual
Advertisement
Table of Contents
