National Instruments VXIpc-745-100 User Manual page 75

Glossary
POSC
PWB
R
Resource Manager
S
s
SIMM
slave
Slot 0 device
SMB
T
trigger
TTL
VXIpc 700 Series User Manual
Power-On Self Configuration. A process by which the MITE chip programs
its own registers from EEPROMs at power up
Printed Wire Board
A message-based Commander located at Logical Address 0, which
provides configuration management services such as address map
configuration, Commander and Servant mappings, and self-test and
diagnostic management
seconds
Single In-line Memory Module
A functional part of a VME/VXIbus device that detects data transfer cycles
initiated by a VMEbus master and responds to the transfers when the
address specifies one of the device's registers
A device configured for installation in Slot 0 of a VXIbus mainframe. This
device is unique in the VXIbus system in that it performs the VMEbus
System Controller functions, including clock sourcing and arbitration for
data transfers across the backplane. Installing such a device into any other
slot can damage the device, the VXIbus backplane, or both.
Sub Miniature Type B connector that features a snap coupling for fast
connection
Either TTL or ECL lines used for intermodule communication
Transistor-Transistor Logic
G-6 © National Instruments Corporation