National Instruments VXIpc-745-100 User Manual page 63

© National Instruments Corporation
How do I install the VXIpc-700 in a slot other than Slot 0?
The VXIpc-700 automatically detects whether it is in Slot 0 of a VXIbus
mainframe. You do not need to change jumper settings to install the
VXIpc-700 in a slot other than Slot 0 unless you have defeated the first slot
detector (FSD) circuitry by changing the appropriate jumper setting on the
VXIpc-700.
Refer to Chapter 3,
VXIpc 700 Series Configuration and
for information on enabling and defeating the FSD circuitry.
How do I check the configuration of the memory, floppy drive, hard
drive, time/date, and so on?
You can view these parameters in the BIOS setup. To enter the BIOS setup,
reboot the VXIpc-700 and press the <DEL> key during the memory tests.
Refer to Chapter 4, BIOS, for more information.
My CMOS is corrupted. How do I set it back to default?
1. Enter the BIOS setup program as described in Chapter 4, BIOS.
Select Auto Configuration with Optimal Settings.
2.
3. Answer Y (Yes) to the verification prompt.
Select Save Settings and Exit.
4.
E-3
Appendix E Common Questions
Installation,
VXIpc 700 Series User Manual