National Instruments VXIpc-745-100 User Manual page 78

Index
documentation
conventions used in manual, x-xi
how to use documentation set, xi
organization of manual, ix-x
related documentation, xii
DRIVE LED, 1-6, C-3
E
EEPROM configuration, 3-5 to 3-7
configuration settings (figure), 3-6
fixing invalid configuration, 3-6 to 3-7
power-on self configuration status
(figure), 3-5
protecting against electrical hazards
(warning), 3-6
electrical specifications, A-1
electronic support services, F-1 to F-2
e-mail support, F-2
environmental specifications, A-2 to A-3
equipment, optional, 1-2
Ethernet
connector and signals, D-7
overview, 2-3
peripheral expansion (table), 1-6
power-on defaults, PC configuration, 3-8
expansion boards. See I/O expansion boards.
F
FAILED LED, 1-6, C-1, C-2, E-1
fax and telephone support, F-2
Fax-on-Demand support, F-2
front panel. See also connectors; LEDs on
front panel.
features, 1-6 to 1-7
layout and dimensions (figure)
VXIpc-740, D-3
VXIpc-745, D-2
FTP support, F-1
VXIpc 700 Series User Manual
G
GPIB (IEEE 488.2)
connectors and signals, D-10 to D-11
overview, 2-3
peripheral expansion (table), 1-7
H
hard disk. See IDE controller.
hardware description, 1-4 to 1-7
custom application-specific interface
chips, 1-4 to 1-5
front panel features, 1-6 to 1-7
models available, 1-4
peripheral expansion, 1-6 to 1-7
Slot 0 functionality, 1-4
I
IDE controller
overview, 2-2
peripheral expansion (table), 1-6
installation. See also configuration.
electrostatic discharge (warning), 3-1, 3-8
installation procedure, 3-8 to 3-9
Slot 0 detection (warning), 3-8
interrupts
choosing free interrupt levels for ISA
boards, E-2
ISA interrupt resource allocations (table),
B-1 to B-2
PCI, B-1
I/O address map (table), B-3 to B-4
I/O expansion boards
overview, 1-6, 2-3
peripherals overview (table), 1-6 to 1-7
ISA interrupt resource allocations (table),
B-1 to B-2
I-2 © National Instruments Corporation