Operation; Incoming Door Call - TCS IVW9011-0261 Instruction Manual

OPERATION

incoming door call

A ring tone signals an incoming call.
The green LED blinks and the video image of
the front-door station is activated.
Speaking
1. Shortly tap on Speaking, to accept the call.
For third parties it is not possible to lis-
ten in to conversations or see the video
image.
2. Shortly tap again on Speaking, to end the call.
Alternatively tap on Home, to end the call.
An automatic call cut-OFF is executed
after 2 minutes.
Door release
1. Shortly tap on Door release, to open the door.
The voice connection is terminated auto-
matically after 5 sec.
Adjust the video image (PTZ camera)
1. Tap on the Arrow keys, to swivel the PTZ ca-
mera to the left, right, upwards or downwards.
2. Tap on Plus or Minus, to zoom in resp. out the
image.
Trigger a control function
You can trigger a control function (e.g. open the
gate) in case of incoming door call or an establis-
hed voice connection.
Please contact your qualified electrician.
Floor call and opening the floor door
1. Tap on Door release, to open the floor door ins-
tead of the front door.
• The floor door release function has to
be activated in the system settings.
• If the floor video function is activated,
the video image of the floor camera is
activated. Please contact your qualified
electrician.
PTZ control
EN
23