User Settings - TCS Tasta Series Instruction Manual

EN
Switch on light
When an incoming door call or an existing speech connection is established, you can switch the light
(e.g. switch on staircase lighting). Press the light button briefly. The light is switched on.
Trigger additional functions with the control or Function button
Press the function key to trigger an additional switching function using the control function.

USER SETTINGS

Call volume
The call volume can be changed in 4 steps during an existing speech connection. Press the volume key
repeatedly until you have set the desired call volume.
Ringtone level
The ring tone volume can be adjusted in 4 steps. There must be no voice communication. Press the
volume key repeatedly. The ring tone is played back at the current ring tone volume.
Selecting the ring tone
You can select different ring tones for floor calls, internal calls and door calls from two front-door
stations.
Ring tone selection activated
Terminate the possible existing speech connection. Press and hold the Call OFF button for about 8
seconds. An acknowledgement tone sounds and the LEDs light up. Ring tone selection activated...
ring tone floor door
...Press the light switch button repeatedly to select the ring tones. The last selected ring tone is now
saved.
...Ring tone Internal call
Press the function key repeatedly until the desired ring tone sounds. The last selected ring tone is now
saved.
ring tone front-door station 1
...Press the door release button repeatedly to select the ring tones. The last selected ring tone is now
saved.
ring tone front-door station 2
...Press the speech button repeatedly to select the ring tones. The last selected ring tone is now saved.
Ending ring tone selection
Briefly press the call OFF key once. A confirmation tone is heard and the LEDs are no longer lit. The
ring tone selection is now finished. If no key is pressed for 8 seconds, the unit automatically terminates
the ring tone selection.
11