Multi Purpose Tray; Face Down Stacker; Face Up Stacker - Oki MC560 User Manual

M
ULTI PURPOSE TRAY
The multi purpose tray can handle the same media sizes as the cassette trays but in
weights of 75g/m² to 203g/m². For very heavy paper stock, use the face up (rear) paper
stacker. This ensures that the paper path through the MFP is almost straight.
The multi purpose tray can feed paper widths as small as 105mm and lengths up to
1200mm (banner printing).
For paper lengths exceeding 356mm (Legal 14in.) use paper stock between 90g/m² and
128g/m² and the face up (rear) paper stacker.
Use the multi purpose tray for printing on envelopes and transparencies. Up to 50 sheets
of transparencies or 10 envelopes can be loaded at one time, subject to a maximum
stacking depth of 10mm.
Watermarked or headed paper should be loaded print side up and top edge into the MFP.
F
ACE DOWN STACKER
The face down stacker on the top of the MFP can hold up to 250 sheets of 80g/m² standard
paper and can handle paper stocks up to 120g/m². Pages printed in reading order (page 1
first) will be sorted in reading order (last page on top, facing down).
F
ACE UP STACKER
The face up stacker at the rear of the MFP should be opened and the tray extension pulled
out when required for use. In this condition paper will exit via this path, regardless of driver
settings.
The face up stacker can hold up to 100 sheets of 80g/m² standard paper, and can handle
stocks up to 203g/m².
Always use this stacker and the multi purpose feeder for paper stocks heavier than
120g/m².
Getting started > 18