Table of Contents
Advertisement
MicroDock II
Users Manual
Base Station MultiMediaCard (MMC)
Event Logging
Bump checks and calibrations are recorded on a
MultiMediaCard (MMC). The MMC is located on the station
inside the battery compartment. It is used to store test
records that are then downloaded from the station to a PC.
Inserting/Replacing a MMC
The MMC is inserted in the station inside the battery
compartment. To insert or replace the MMC, refer to
Figure 19 and complete the following:
Figure 19. Replacing a MMC
66
1.
Deactivate the station.
2.
Loosen, the retaining screws from the battery
cover.
3.
Remove the battery cover and set it aside.
4.
Remove the current MMC (if applicable).
5.
Insert the new MMC into the memory card slot.
6.
Replace the battery cover and tighten the retaining
screws.
Data that is saved on the MMC can be transferred to a PC.
To format an MMC, refer to
(MMC)
in the User Options Menu section.
The transferred data is then compiled using a computer
software application called Fleet Manager. Refer to the Fleet
Manager Deluxe CD for installation and user instructions.
Accessing Test Results
To access and view test results using the Fleet Manager
software application, refer to the Fleet Manager Deluxe CD.
Format the MultiMediaCard
Advertisement
Table of Contents
