Table of Contents
Advertisement
MicroDock II
Users Manual
If a detector is inserted but not activated, the LCD displays
the following message.
Press C OK to acknowledge the error message.
Batteries: The batteries are tested during activation and
continuously thereafter. If battery power is extremely low, the
low battery icon
flashes.
MultiMediaCard (MMC): The MMC icon ( ) displays
continuously on the normal operating screen when the MMC
is inserted. The MMC records a variety of data.
Pass Code Protection: If the station is pass code protected,
the pass code protect icon
operating screen.
Deactivating the Station
The station must be in the normal operating mode to
deactivate. From the normal operating screen, press and
hold C (the rightmost button) until Powering Down
displays.
30
displays on the normal
The power down screen displays briefly before the station
deactivates.
User Options Menu
The user options menu provides access to ten options. The
following user options are listed in the order they are
displayed on the station LCD.
Bump or calibration tests cannot be performed while the user
options menu is accessed. However, if a test is initiated
before or while accessing the user options menu, the test
automatically begins when the user options menu is exited.
Note
Advertisement
Table of Contents
