Table of Contents
Advertisement
MicroDock II
Users Manual
Format the MultiMediaCard (MMC)
This option is used to format the MultiMediaCard (MMC).
If a previously formatted MMC is used to reformat, all of the
data on the card will be erased.
To format an MMC, complete the following:
1.
Activate the station if required.
2.
On the station, remove the cover from the battery
compartment. Refer to
3.
Insert the MMC into the slot above the battery
compartment.
Figure 17. Insert the MMC into the Station
40
Note
Battery
Installation.
If the MMC has never been formatted, the station will
automatically prompt to format the card (refer to step #5-6).
Press C
or C
4.
option.
Press C sel to confirm the selection and to access
5.
the formatting confirmation screen.
Press C Yes to initiate formatting. The following
6.
screen displays.
When formatting is complete, the LCD
automatically returns to the user options screen.
Note
to scroll to the Format MMC
Advertisement
Table of Contents
