Table of Contents
Advertisement
When the detector has been inserted correctly, the
RUN LED(s) on the docking module lights yellow
and Unit Inserted displays.
The station LCD displays the following docking
module identification; the
•
type of detector that is inserted, and
•
bay and serial number of the docking module.
6.
To bypass the station identification screen, press
any C button on the base station.
Inserting the GasAlertMicro
a
Infrared or intense ambient light (sun or halogen) may
interfere with the station/detector communication.
Caution
Inserting the GasAlertMicro
Figure 6. Inserting the GasAlertMicro
MicroDock II
13
Advertisement
Table of Contents
