Ricoh PD-D1 Field Service Manual page 213

Input installation date
Input the installation date as shown below. Press the Enter (#) key between each one.
1. Input the last two digits of the present year (two-digit number).
2. Input the present month (two-digit number).
3-4
3. Input the present date (two-digit number).
Example: 2003/January/27th/13:00:00
1. Input 03 then press Enter (#).
2. Input 01 then press Enter (#).
3. Input 27 then press OK
3-9 Key counter setting
Set whether connect the key counter.
Key card setting
3-10
Set whether connect the key card.
Input mode
4
Checks the input of sensors.
4-1 Scanner HP sensor
4-2 Platen cover sensor
4-3 Original Length Sensor1
4-4 Original Length Sensor2
4-5 Thermal head HP sensor
4-6 Master making unit set SW
4-7 Master set cover sensor
4-8 Cutter HP switch
4-9 Master end sensor
4-10 Master edge sensor
[yy.mm.dd / 00.1.1 / -]
[ YES - NO / NO / -]
[ YES - NO / NO / -]
SP Table
35