Table of Contents
Advertisement
2. Installation Procedure
The Aim of Anti-tip Components and Precautions
The anti-tip components are necessary for meeting the requirements of IEC60950-1, the international
standard for safety.
The aim of these components is to prevent the products, which are heavy, from toppling as a result of
people running into or leaning on the products, which can lead to serious accidents such as persons
becoming trapped under the product.
(U.S.: UL60950-1, Europe: EN60950-1)
Therefore, removal of such components must always be with the consent of the customer.
Do not remove them at your own judgment.
Installation Procedure
1. Remove the strips of tape.
• When unloading the ADF from a pallet, hold the front and rear sides of the ADF .
48
Advertisement
Chapters
Table of Contents
