Ricoh PD-D1 Field Service Manual page 168

6. Troubleshooting
Component
Duct Jam Sensor
Duct Plate HP sensor
Master Edge Sensor
Thermal Head HP Sensor
Thermal Head Temperature Sensor
ADF Original Detection
166
Condition
There is a The "D" jam indicator is lit.
master on
the drum.
There is a master in the lower master tray, but
the duct jam sensor does not detect a master, the
No master
master vacuum fans do not pull the master, and
E-01 is displayed.
ON E-42 is displayed.
OFF
There is a The "D" jam indicator is lit.
master on
the drum.
No master
increase the E-47 is displayed.
pressure
release the
pressure
E-09 is displayed whenever the start button is
Open
pushed.
E-04 is displayed whenever the start button is
Shorted
pushed.
The original is fed even if the ADF does not
have an original. Therefore the "P" jam
indicator is lit
Open
The Jam LED is ON. The machine cannot shift to
the energy-saving mode at the correct time.
The Platen Cover is scanned even if the ADF
has an original
Shorted
Even if the original is set in the ADF in energy-
saving mode, it cannot return from energy-
saving mode.
Symptom