Ricoh PD-D1 Field Service Manual page 156

5. System Maintenance Reference
5. Output mode, 6. Adjustment, 7. Memory clear, 8. System test
2. Using the number keys or the
press the Enter key or the OK key.
3. Enter the desired value or mode using the number keys (SP modes are listed in the service program
tables).
• Use the Memory/Class [F] key to toggle between "+" and "-".
• To enter a decimal place, you do not have to enter a decimal point. For example, to enter
"1.5" just press "1" and "5" keys.
4. Press the Enter key or the OK key to store the displayed setting.
5. Follow the "Change Adjustment Values or Modes" procedure below.
• To cancel the SP mode, press the Clear Modes/Energy Saver key [G] or the Cancel key [H]
154
keys or the zoom keys, enter the desired sub-menu number, then