Operation; Manual Control; On/Off; Wi-Fi On/Off - Rinnai ES750 Operation & Installation Manual

OPERATION

The appliance can be operated conveniently in 3 different ways: manually, via the remote control handset or via
the dedicated iOS/Android app (with Wi-Fi connectivity).

MANUAL CONTROL

Each time a button is pressed on the appliance or on the remote control an audible beep is emitted. To turn off this
feature hold your finger on the Preset Mode button (on the appliance) for 3 Seconds.
Figure 1.

Preset Mode

Heat Mode

Standby

Wi-Fi On/Off

On/Off

ON/OFF
Press to turn on power to the appliance. Button pushed in indicates power is on, button pushed out indicates power
is off.
Wi-Fi On/Off
Press to turn Wi-Fi on or off. An illuminated LED on the button indicates that Wi-Fi is turned on. Hold button for 3
seconds to enter device pairing mode.
Standby
Turns on the appliance with the last used settings without any heat. Places the appliance into standby mode with
all features turned off.
Heat Mode
1 press = cool blow. 2 press = low heat setting. 3 press = high heat setting. 4 press = no heat/no cool blow.
Preset Mode
Press repeatedly to cycle through the 6 fire preset modes (+3 user defined pre-sets if programmed).
Rinnai 7 Electric Fire Heater OIM – Issue 1