Page 1
MODELS ES750 ES1500 ES1000 ES1800 ES1300 ES2200 Electric Fire Heater Wi-Fi Operation Manual...
Page 2
Before proceeding with the operation or installation of your new heater, please read this manual thoroughly and gain a full understanding of the requirements, features and operation. Rinnai Electric Fire Heater Wi-Fi OM – Issue 1...
You must follow the instructions in the Wi-Fi Operation Manual to operate the Rinnai ES Fire Heater via the App. You must not use the App for any prohibited or unlawful purpose. The App is available as another means to control and monitor the Rinnai ES Fire Heater, but should not be used for critical heating or cooling applications.
WI - FI COMPATIBILITY / CONNECTIVITY Rinnai ES Fire heater models are fitted with built-in Wi-Fi connectivity. Using the Tuya Smart App (available from Apple App Store or Google Play) it is then possible to use a smart phone to operate these appliances remotely.
2. Read and confirm the User 3. Register via email. time users. Agreement and Privacy Policy. Enter verification code Set password Allow permissions Password may require a number of characters including alphabet and numerals. NOTE Rinnai Electric Fire Heater Wi-Fi OM – Issue 1...
Page 7
WI - FI SET UP Follow prompts on the screen. Follow prompts on the screen. Follow prompts on the screen. Follow prompts on the screen. 'Welcome' page. Rinnai Electric Fire Heater Wi-Fi OM – Issue 1...
Page 8
Wi-Fi button on the appliance more than 5 seconds. The appliance will respond with a beep and a flashing red fuel bed to confirm Wi-Fi activation. Rinnai Electric Fire Heater Wi-Fi OM – Issue 1...
Page 9
Device List page will be displayed with the new device listed when configuration is complete. To add additional device to the current mobile device press the + 'Add button' and follow the NOTE screen prompts. Rinnai Electric Fire Heater Wi-Fi OM – Issue 1...
Page 10
Once successfully paired the fuel bed will display green. If a flashing blue fuel bed NOTE appears check your connection and repeat the pairing procedure. Flashing Red – In Pairing Flashing Green – Successfully Paired Flashing Blue – Failed Pairing Rinnai Electric Fire Heater Wi-Fi OM – Issue 1...
Tuya App to control the appliance. If the connection problems persist and you are unable to connect to the appliance, please contact your network provider for advice on the best solution. Rinnai Electric Fire Heater Wi-Fi OM – Issue 1...
OFF. • Preset mode – 6 preset flame modes and 3 user defined presets. • Set temperature – Setting temperature can be adjusted from 5°C to 40°C. Rinnai Electric Fire Heater Wi-Fi OM – Issue 1...
24hour x 7 days at 1 hour interval). • Heater Mode – Set AUTO, HIGH or LOW. • Temperature Unit –Set °C or °F. Settings My Flame Flame Effect Rinnai Electric Fire Heater Wi-Fi OM – Issue 1...
Page 14
OPERATION Set Flame Program Flame Mode Set Heater Program Heater Mode Temperature Unit Rinnai Electric Fire Heater Wi-Fi OM – Issue 1...
OPERATION DEVICE SETTING INFORMATION To enter the Device settings, at the top right hand of Operation page. Set device as preferred. Rinnai Electric Fire Heater Wi-Fi OM – Issue 1...
Page 16
OPERATION Rinnai Electric Fire Heater Wi-Fi OM – Issue 1...
Page 17
NOTES Rinnai Electric Fire Heater Wi-Fi OM – Issue 1...
Page 18
NOTES Rinnai Electric Fire Heater Wi-Fi OM – Issue 1...
Page 19
NOTES Rinnai Electric Fire Heater Wi-Fi OM – Issue 1...
Page 20
Monday to Friday, 8.00 am to 5.00 pm EST. *Cost of a local call may be higher from a mobile phone. (National calls from public phones in Australia are free.) For further information visit www.rinnai.com.au or email enquiry@rinnai.com.au innai has a Service and Spare Parts network with...