Panasonic WJ-SX550C Operating Instructions Manual page 61

System 500 matrix switcher
Hide thumbs Also See for WJ-SX550C:
Table of Contents

Advertisement

SETUP MENU
The Setup Menu provides a way for controlling functions
that are not available by a direct operation. Access to the
Setup Menu is limited to operators with the proper opera-
tor's level.
Access to the Setup Menu
1. System Log-in
Refer to Log-in on page 95 for details.
2. Select the desired monitor for viewing the Setup Menu.
Refer to Monitor Selection on page 98.
3. Select the Set Up Menu (A6) on the LCD display by
pressing the Direction buttons (A B D C).
Set Up Menu
4. Press the Function F1 button to allow access to the
Setup Programming Menu (Set Up Menu).
4
The menu now appears on the active monitor.
Set Up Menu
Next
Note: The Setup Menu is initially set to the default val-
ues.
It can be programmed to limit access to certain
operator levels.
If the Setup Menu does not appear on the active
monitor and "PROHIBITED" appears on the LCD
display, press the MON (ESC) key to return to the
previous Set Up Menu display.
The following buttons and keys are valid In the Setup
Menu:
Function buttons
F1: Selects the next page.
F2: Selects the previous page.
F3: Deletes or initializes the setting where the cursor is
positioned.
F4: Opens the Pop Up Window.
64
On
F1 F2
F3 F4
Pre
Del PopUp
F1 F2
F3 F4
Executes the setting or selection.
CAM
SET
Escapes from the programming mode or
MON
menu.
ESC
Performs various functions, depending on
INC
DEC
+1CAM
-1CAM
the selected menu
Access to the Printer Menu
1. Press the Direction (C) button to access the menu on
the LCD display as shown below.
Set Up Menu
Print Clear
F1 F2
2. Press the Function F1 button to open the Pop Up
Window, and then select the desired print out mode by
moving the Joystick Controller.
Press the CAM (SET) key to start printing out the
selected setup data.
Press the MON (ESC) key to stop printing.
To Clear all data from a table:
1. Press the Function F2 button to open the Pop Up
Window.
Select "Yes" by moving the Joystick Controller, and then
pressing the CAM (SET) key to delete all data from the
selected programmed table.
F3 F4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wv-cu550cj

Table of Contents