Table of Contents
Advertisement
Home Position Setting
In the PRESET PROGRAM menu, select SET HOME POSI,
and then press the CAM (SET) key. The HOME POSITION
table shown below appears on the active monitor.
CAM
1 HOME POSITION :
2 AUTO HOME POSITION
1. Move the cursor to the HOME POSITION parameter by
moving the Joystick Controller, then select the desired
position number by pressing the Numeric keys.
2. Move the cursor to the AUTO HOME POSITION para-
3
meter by moving the Joystick Controller, then select
either mode Off or a desired time by pressing the INC
+1CAM button or DEC -1CAM button.
3. Press the CAM (SET) key to execute the selection and
return to the previous Preset Program Menu.
Note: When the auto home position function is enabled
a camera will move to the designated home position
automatically after a predetermined period of time.
120
: CameraTitle
*HOME POSITION*
15
: 10MIN
Preset Test Mode
In the PRESET PROGRAM menu, select PRESET TEST,
and then press the CAM (SET) key. The table shown below
appears on the active monitor.
CAM
: CameraTitle
POSITION NUMBER : 12
TEST
ESC→STOP
1. Press the CAM (SET) key to activate the test mode.
The selected camera moves to all preset positions, pro-
ceeding from the lowest preset number to the highest.
The above function will automatically end after ten min-
utes.
2. Press the MON (ESC) key to escape from the preset
test mode.
3. Press the MON (ESC) key again to return to the previ-
ous Preset Program Menu.
Advertisement
Table of Contents
