Stamina 15-0344A Owner's Manual page 10

ASSEMBLY INSTRUCTIONS
STEP 8
Refer to illustration 1. Screw the SOCKET HEAD BOLT(M6x1x12mm)(108) into the inner side of the LEFT
RESISTANCE ARM(99).
STEP 9
Assemble the RESISTANCE ARMS(99, 100) by attaching the ARM BRACKET(6) to the BACK
FRAME(4) with SOCKET HEAD BOLTS(M8x1.25x15mm)(94) and LOCK WASHERS(M8)(88). Screw
the ADJUSTMENT PIN(97) into the ARM BRACKET(6), and make sure the pin is inserted into one of the
adjustment holes in the LEFT RESISTANCE ARMS(99). The angle between two RESISTANCE ARMS(99,
100) is adjustable by inserting the ADJUSTMENT PIN(97) into a different adjustment hole. Pull the ball
knob of the ADJUSTMENT PIN(97) to adjust.
STEP 10
Insert the HANDLEBAR(21) into the BACK FRAME(4). Make sure the BUTTON PIN(121) pops into the
holes in the BACK FRAME(4) to lock the HANDLEBAR(21) in position.
1.
10