Lincoln Electric POWER FEED 25M Service Manual page 27

B-9
NON-SYNERGIC GMAW
WELDING
(See Figure B.4)
Non-synergic GMAW and FCAW welding mimics the
welding controls of traditional welding power sources.
Voltage and WFS are set as independent variables.
All manuals and user guides at all-guides.com
OPERATION
AND FCAW
FIGURE B.4
6
3
4
2
K2368-1 Power Wave 355M
1 K2202-1 Power Wave 455M
K2203-1 Power Wave 455M/STT
K2230-1 Power Feed 10M, Bench Model
K2234-1 Power Feed 10M Dual, Bench Model
K2536-1 Power Feed 25M
2 KP1696-xx, Drive Roll Kit, 2 Roll Feeder
KP1697-xx
KP1505-xx, Drive Roll Kit, 4 Roll Feeder
KP1507-xx
3 K1543-xx Digital Control Cable
4 K1842-xx Weld Power Cable, Lug to Lug
K910-xx Ground Clamp
5 See Magnum MIG gun
Literature
Deluxe Regulator for Mixed
6 K586-1 Shielding Gases
Shielding Gas Hose
POWER FEED® 25M
Three non-synergic welding modes are available.
Description Mode
GMAW, Standard CV
GMAW, Power
FCAW
1
5
B-9
Used for:
5 Best for traditional
MIG welding.
40 Specialized mode
for short arc weld-
ing and CV alu-
minum welding.
6 Best for cored
electrodes, such
as Innershield™
and Outershield™.