Table of Contents
Advertisement
Controls System
Maintenance
Adjusting the Lift Lever
Adjust the detent plate of the lift lever
the attachment does not float properly (follow ground
contour) during operation.
1.
Park the machine on a level surface, shut off the
engine, engage the parking brake, and block the
wheels.
2.
Remove the 4 screws securing the control panel
to the frame
(Figure
Figure 37
1. Control panel
2. Screws
3.
Loosen the 2 bolts securing the detent plate to
the fender and the frame.
Figure 38
1. Detent plate
(Figure
38) if
37).
2. Mounting bolts
WARNING
The engine must be running so that you
can adjust the detent plate. Contact with
moving parts or hot surfaces may cause
personal injury.
Keep your hands, feet, face, and other
body parts away from rotating parts, the
muffler, and other hot surfaces.
4.
Start the engine.
5.
With the engine running and the lift lever in the
F
position, slide the detent plate until the lift
LOAT
cylinder can be extended and retracted by hand.
6.
Tighten both mounting screws to secure the
adjustment.
g002733
g002734
30
Advertisement
Table of Contents
