Maintenance; Recommended Maintenance Schedule(S) - Toro 30874 Operator's Manual

Maintenance

Important: Refer to your engine owner's manual for additional maintenance procedures.
Note: Download a free copy of the electrical or hydraulic schematic by visiting www.Toro.com and searching for your
machine from the Manuals link on the home page.
Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first hour
After the first 10 hours
After the first 50 hours
After the first 200 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 200 hours
Every 250 hours
Every 400 hours
Every 800 hours
Maintenance Procedure
• Torque the wheel-lug nuts.
• Torque the wheel-lug nuts.
• Change the engine oil and filter.
• Change the front planetary-gear oil.
• Change the rear-axle lubricant.
• Change the hydraulic filters.
• Check the tire pressure.
• Check the interlock switches.
• Check the blade stopping time.
• Check the engine-oil level.
• Drain water or other contaminants from the water separator.
• Drain water or other contaminants from the fuel filter/water separator.
• Check the rear axle and rear-axle gearbox for leaks.
• Check level of coolant at the beginning of each day.
• Remove debris from the engine area, oil cooler, and radiator.
• Check the hydraulic-fluid level.
• Inspect the hydraulic lines and hoses for leaks, kinked lines, loose mounting
supports, wear, loose fittings, weather deterioration, and chemical deterioration.
• Grease the bearings and bushings. (And after every washing).
• Check the battery condition.
• Check the condition and tension of the alternator belt.
• Torque the wheel-lug nuts.
• Change the engine oil and filter.
• Service the air cleaner (earlier if the air cleaner indicator shows red, and more
frequently in extremely dirty or dusty conditions).
• Inspect the fuel lines and connections.
• Replace the fuel-filter canister.
• Replace the engine fuel filter.
• Check for end-play in the planetary drives.
• Check the planetary-gear-drive oil (check if you notice external leakage).
• Check for end-play in the planetary drives.
• Check the rear-axle lubricant.
• Check the rear-axle-gear-box lubricant.
• Drain and clean the fuel tank.
• Change the front planetary-gear oil or yearly, whichever comes first.
• Change the rear-axle lubricant.
• Check the rear wheel toe-in.
• Change the hydraulic fluid.
• Change the hydraulic filters.
34