Toro 30874 Operator's Manual page 16

Note: The cutting decks do not operate and/or cannot be
lowered from the transport position when the switch is in
the high range.
Lift Switches
The lift switches raise and lower the mower decks
10). Press the switches forward to lower the mower decks
and rearward to raise the mower decks. When starting the
machine, with the mower decks in the down position, press
the lift switch down to allow the mower decks to float and
mow.
Note: The decks do not lower while in the high-speed range
and they do not raise or lower if you are out of the seat while
the engine is running. Also, the decks lower with the key in
the O position and you are in the seat.
N
Cruise-Control Switch
The cruise-control switch locks in the pedal position to
maintain the desired ground speed
rear of the switch turns off the cruise control, the middle
position of the switch enables the cruise-control function,
and the front of the switch sets the desired ground speed.
Note: Pressing either brake pedal or moving the traction
pedal into the reverse position, for 1 second, also disengages
the pedal position.
Light Switch
Press the lower edge of the switch
lights. Press the upper edge of the switch to turn off the lights.
Power Point
Use the power point (Figure
electrical accessories.
1. Power point
(Figure
(Figure 10). Pressing the
(Figure 10) to turn on the
11) to power optional 12 V
Figure 11
2. Bag holder
Bag Holder
Use the bag holder for storage
Seat Adjustments
Seat-Adjustment Lever
Move the seat adjustment lever on the side of the seat
outward, slide the seat to the desired position, and release the
lever to lock the seat into position
4
3
2
1
1. Weight gauge
2. Weight adjustment lever
3. Seat adjustment lever
Armrest Adjustment Knob
Rotate the knob to adjust the armrest angle
Seat-Back Adjustment Lever
Move the lever to adjust the seat-back angle
Weight Gauge
The weight gauge indicates when the seat is adjusted to the
weight of the operator
positioning the suspension within the range of the green
region.
Weight Adjustment Lever
Use this lever to adjust to the proper weight of the operator
(Figure 12). Pull up the lever to increase the air pressure
g036845
and push down to decrease the air pressure. The proper
adjustment is correct when the weight gauge is in the green
region.
16
(Figure 11).
(Figure 12).
5
G024916
Figure 12
4. Seat-back adjustment
lever
5. Armrest adjustment knob
(Figure
(Figure
(Figure 12). Adjust the height by
g024916
12).
12).