Toro 30874 Operator's Manual page 10

This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum
recommended slope indicated on the decal. Review the instructions for operating the machine on slopes in the Operator's
Manual and the conditions in which the machine is being operated to determine whether the machine can be operated in
the conditions on that day and at that site. Changes in the terrain can result in a change in slope operation for the machine.
If possible, keep the cutting units lowered to the ground while operating the machine on slopes. Raising the cutting units
1. Warning—read the
Operator's Manual; do
not operate the machine
unless you have received
training.
2. Warning—read the
Operator's Manual for
information on towing.
For Groundsmaster 4700 Only
while operating on slopes can cause the machine to become unstable.
3. Tipping hazard—do not
drive on slopes greater than
21 degrees.
4. Keep the decks lowered
while driving down slopes;
always wear a seat
belt when operating the
machine.
127-6448
5. Warning—do not park on
slopes; 1) Engage the
parking brake, 2) Lower
the decks, 3) Shut off the
engine, 4) Remove the key,
5) Leave the machine.
6. Thrown object
hazard—keep bystanders
away from the machine.
10
decal127-6448
7. Entanglement hazard,
belt—keep away from
moving parts; keep all
guards and shields in place.