Toro 30874 Operator's Manual page 17

Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about your
machine, such as the operating status, various diagnostics
and other information about the machine
There is a splash screen and main information screen of
the InfoCenter. You can switch between the splash screen
and main information screen at any time by pressing any of
the InfoCenter buttons and then selecting the appropriate
directional arrow.
1
4
Figure 13
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press this
button to access the InfoCenter menus. You can use it to
exit any menu that you are currently using.
•
Middle Button—use this button to scroll down menus.
•
Right Button—use this button to open a menu where a
right arrow indicates additional content.
•
Beeper—activated when lowering the decks or for
advisories and faults.
Note: The purpose of each button may change depending
on what is required at the time. Each button is labeled with
an icon displaying its current function.
(Figure 13).
g020650
2
3
3. Middle button
4. Left button
InfoCenter Icon Description
SERVICE DUE
g020650
17
Indicates when scheduled service
should be performed
The status of the engine rpm.
Info icon
Maximum traction speed setting
Fast
Slow
The fan is reversed.
Stationary regeneration is required.
The air-intake heater is active
Raise the left deck.
Raise the center deck
Raise the right deck
The operator must sit in the seat.
The parking brake is on.
The range is high.
Neutral
Identifies the range as Low
Coolant temperature (°C or °F)
Temperature (hot)
Traction or Traction Pedal
Not allowed
Start the engine.
The PTO is on.