Toro 30874 Operator's Manual page 42

Figure 42
Note: When using different oil, drain all old oil from
the crankcase before adding new oil.
Changing the Engine Oil and Filter
Service Interval: After the first 50 hours
Every 250 hours
1. Start the engine and let it run 5 minutes to allow the
oil to warm up.
2. Park the machine on a level surface, engage the parking
brake, shut off the engine, and remove the key.
g198647
3. Replace the engine oil and filter
g031256
4. Add oil to the crankcase.
42
(Figure 43).
Figure 43
g198660
g031675