Table of Contents
Advertisement
@
Oil drain plug
mm wrench.
3. After the oil stops draining from the
crankcase, operate the kick starter
several times to drain any oil which
may be left in the recesses of the
engine.
4. When the oil has been completely
drained, reinstall the drain plug
©,
making sure that the sealing washer
used on the drain plug is in good
condition.
5. Fill the crankcase with approximately
2.1 US quarts (2 liters)
of
recommend-
ed grade oil.
Check
the oil level with
the filler cap dipstick. When making
this check, do not
screw
in the cap. Oil
level should be between the upper
®
and lower
®
level marks (page 3 2) on
the dipstick. When checking the oil
make certain that the motorcycle is in
upright and level position.
NOTES:
·
If the oil is below the lower le"el mark
on the dipstick and oil up to the
proper level before operating engine
..
When operating the motorcycle 1n
unusually dusty conditions, the oil
changes must be performed at more
frequent intervals than those specified
in the maintenance schedule.
33
Advertisement
Table of Contents
