Siemens SIMATIC ET 200SP Manual page 9

● Electrically isolated from the supply voltage L+ (only for input type 4-wire transducer)
● Permitted common mode voltage: 10 V
● Configurable diagnostics per module
The module supports the following functions:
● Firmware update
● I&M identification data
● Configuration in RUN
● PROFIenergy
Table 2- 1
Value status
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Accessories
The following accessories must be ordered separately:
● Labeling strips
● Color identification labels
● Reference identification label
● Shield connector
See also
You will find additional information on the accessories in the ET 200SP distributed
I/O system (http://support.automation.siemens.com/WW/view/en/58649293) system manual.
Analog Input Module AI 4xI 2-/4-wire ST (6ES7134-6GD00-0BA1)
Manual, 07/2014, A5E03551866-AC
Version dependencies of other module functions
Function
SS
Product version
of the module as of
1
Product overview
2.1 Properties
Firmware version
of the module as of
V1.1.0
9