Siemens SIMATIC ET 200SP Manual page 24

Technical specifications
6.1 Technical specifications
Measured value smoothing
Configurable
Setting: None
Setting: Weak
Setting: Medium
Setting: Strong
Encoders
Connection of the signal transmitters
for current measurement as 2-wire transducer
Load of the 2-wire transducer, max.
•
for current measurement as 4-wire transducer
Errors/accuracies
Linearity error (in relation to input range), (+/-)
Temperature error (in relation to input range), (+/-)
Crosstalk between inputs, min.
Repeat accuracy in settled state at 25 °C
(in relation to input range), (+/-)
Operational limit in the entire temperature range
Current in relation to input range, (+/-)
Basic error limit (operational limit at 25 °C)
Current in relation to input range, (+/-)
Interference voltage suppression for f = n x (f1 +/- 1 %),
f1 = interference frequency
Series-mode interference (peak of the interference <
nominal value of the input range), min.
Common mode voltage, max.
Common mode interference, min.
Interrupts/diagnostics/status information
Interrupts
Diagnostics interrupt
Diagnostics alarms
Diagnostics
Monitoring of supply voltage
Wire break
Short-circuit
Group error
Overflow/underflow
Diagnostics display LED
Monitoring of the supply voltage (PWR LED)
Channel status display
For module diagnostics
24
6ES7134-6GD00-0BA1
Yes
Yes
Yes
Yes
Yes
Yes
650 Ω
Yes
± 0.01 %
± 0.005 %
50 dB; applies to up to +/-5 V overvoltage in other channels
± 0.05 %
± 0.5 %
± 0.3 %
70 dB
10 V
90 dB
Yes
Yes
Yes
Yes; for 4 to 20 mA
Yes; 2-wire operation: Short-circuit of the encoder supply
to ground or short-circuit of an input to the encoder supply
Yes
Yes
Yes; green LED
Yes; green LED
Yes; green/red LED
Analog Input Module AI 4xI 2-/4-wire ST (6ES7134-6GD00-0BA1)
Manual, 07/2014, A5E03551866-AC