Siemens SIMATIC ET 200SP Manual page 14

Parameters/address space
4.2 Parameters
Parameter
Smoothing
Interference frequency
suppression
Potential group
Interference frequency suppression: Noise at 400 Hz is automatically included in the filtering at 50 Hz.
1
Note
Unused channels
"Disable" unused channels in the parameter assignment to improve the cycle time
of the module.
A disabled channel always returns the value 7FFF
14
Value range
none
•
weak
•
medium
•
strong
•
60 Hz
•
50 Hz
• 1
16.6 Hz
•
Use potential group of the
•
left module
Allow new potential group
•
Default Configuration
in RUN
none yes
50 Hz yes
Use potential no
group of the
left module
.
H
Analog Input Module AI 4xI 2-/4-wire ST (6ES7134-6GD00-0BA1)
Effective range
with configuration software,
e.g. STEP 7 (TIA Portal)
GSD file GSD file
PROFINET IO PROFIBUS DP
Channel Channel
Channel Module
Module Module
Manual, 07/2014, A5E03551866-AC