Option Q13 - Encoder Sealing; Force-Ventilated - Siemens SIMOTICS S-1FT7 Configuration Manual

Motor components and options
4.2 Options
4.2.4.11

Option Q13 - Encoder sealing

Z option Q13 improves sealing at the flange sealing surfaces of the encoder and power
connector on the motor with wetting sealant adhesive.
Encoder replacement is only possible in a specialist workshop or at the manufacturer's.
Option Q13 is only available for motors with DQI encoders that have the following letters at
the 14th position of the article number:
4.2.4.12 Option Q41-Q44 - Connector outlet directions for fixed fan connectors at 1FT7117

force-ventilated

With option Q41 ... Q44 you can select the outlet direction of the fixed fan connector,
e. g. 1FT7117-7SC71-1LH0-Z Q4☐
1
A
B
Figure 4-18
1) Selectable connector outlet direction of the fan connector in the following table
Table 4- 9
102
Article number
1FT7☐☐☐-☐☐☐☐☐-☐B☐☐
1FT7☐☐☐-☐☐☐☐☐-☐K☐☐
1FT7☐☐☐-☐☐☐☐☐-☐C☐☐
1FT7☐☐☐-☐☐☐☐☐-☐L☐☐
Fan connector, outlet direction Q41 - transverse right
DE - Drive end
NDE - Non drive end
Outlet direction of the fixed fan connector
Outlet directions of the fixed fan connector
Q41 Transverse to the right
Q42 Transverse to the left
.
1)
Q43
Q44
Configuration Manual, 09/2018, A5E45099423B AA
Encoder type
AS24DQI
AM24DQI
Axial to NDE
Axial to DE
S-1FT7 synchronous motors