Degree Of Protection - Siemens SIMOTICS S-1FT7 Configuration Manual

Mechanical properties

3.2 Degree of protection

3.2 Degree of protection
The degree of protection designation in accordance with EN 60034-5 (IEC 60034-5) is
described using the letters IP and two digits, e.g. IP64.
IP = International Protection
1st digit = protection against the ingress of foreign bodies
2nd digit = protection against water
The validity of DIN 60034-5 refers to water as a medium that can potentially enter, and not
oil. Since machine tools, for example, use oil-containing, creep-capable and/or aggressive
cooling lubricants, protection only against water is not sufficient.
Configure the motor in the environment of creep-capable oils with the appropriate degree of
protection.
Effect / environment
Dry
Environment with
liquids
Mist
Spray
Jet
Splash, brief submer-
sion
Specified degrees of protection as a function of the ambient conditions
Available degrees of protection
1FT7 motors can be supplied with degree of protection IP64, IP65, or IP67 according to EN
60034-5 (IEC 60034-5).
1FT7 motors with forced ventilation are available with degree of protection IP54 according to
EN 60034-5 (IEC 60034-5).
50
General workshop Water,
environment general cooling lubricant
(95% water, 5% oil), oil
IP64
-
-
-
-
-
Creep oil, kerosene, ag-
gressive cooling lubricants
-
IP64
IP65
IP65 IP67 + additional
IP67 IP67 + additional
IP67 IP67 + additional
S-1FT7 synchronous motors
Configuration Manual, 09/2018, A5E45099423B AA
-
IP67
IP67
measures
measures
measures