Honeywell UDC2800 Product Manual page 107

Chapter 4 - Configuration
Function Prompt
Calculated Low
Algorithm 1 Input A
Algorithm 1 Input B
Algorithm 1 Input C
107
Selections or Range of
Setting
–999. To 9999.
Floating
(in engineering units)
Input 1
Input 2
Output
Input 1
Input 2
Output
None
Input 1
Input 2
Output
Parameter Definition
functions was selected as the Input
Algorithm. See Note 2.
Calculated Variable Low Scaling
Factor for Input Algorithm 1 —Used
only when either Summer, Input
Hi/Lo, or one of the General Math
functions was selected as the Input
Algorithm. See Note 2.
Algorithm 1, Input A Selection will
represent one of the available
selections.
Input 1
Input 2
Output – Should not be used for
Three Position Step Control
applications)
Algorithm 1, Input B Selection will
represent one of the available
selections.
Input 1
Input 2
Output – Should not be used for
Three Position Step Control
applications)
Algorithm 1, Input C Selection will
represent one of the available
selections.
No Algorithm 1 Input C configured
Input 1
Input 2
Output – Should not be used for
Three Position Step Control
applications)