Selecting A Dsc Channel; Making An Individual Routine Call; Making An Individual Routine Call To An Ais Target; Gauges And Graphs - Garmin GPSMAP 84 Series Owner's Manual

Selecting a DSC Channel

NOTE: The selection of a DSC channel is limited to those channels that are available in all frequency bands. The
default channel is 72. If you select a different channel, the chartplotter uses that channel for subsequent calls
until you call using another channel.
1 Select Info > DSC List.
2 Select a vessel or a station to call.
3 Select Review > Call with Radio > Channel.
4 Select an available channel.

Making an Individual Routine Call

NOTE: When initiating a call from the chartplotter, if the radio does not have an MMSI number programmed, the
radio will not receive call information.
1 Select Info > DSC List.
2 Select a vessel or a station to call.
3 Select Review > Call with Radio.
4 If necessary, select Channel, and select a new channel.
5 Select Send.
The chartplotter sends information about the call to the radio.
6 On your Garmin VHF radio, complete the call.

Making an Individual Routine Call to an AIS Target

1 From a chart or 3D chart view, select an AIS target.
2 Select AIS Vessel > Call with Radio.
3 If necessary, select Channel, and select a new channel.
4 Select Send.
The chartplotter sends information about the call to the radio.
5 On your Garmin VHF radio, complete the call.
The gauges and graphs provide various information about the engine and environment. To view the
information, a compatible transducer or sensor must be connected to the network.

Viewing the Gauges

1 Select OneHelm™, A/V, Gauges.
2 Select a gauge.
3 Select or to view a different gauge page.

Gauges and Graphs

Gauges and Graphs
115