Table of Contents
Advertisement
Useful Information
Problem
Caller information is not
announced.
Time on the unit has shifted.
Using Bluetooth devices
Problem
I cannot copy phonebook
entries from a mobile phone.
76
Cause/solution
R The ringer volume for landline is turned off. Adjust the
ringer volume (page 43, 46).
R The ringer volume for mobile line is turned off. Adjust the
ringer volume (page 41, 46).
R The unit which is not selected to ring for mobile calls does
not announce caller information. To change the selection,
see page 17.
R The Talking Caller ID feature is turned off. Turn it on
(page 43, 46).
R The ring as mobile mode is set to "On (without
Talking CID)". To change the mode, see page 17.
R The number of rings for the answering system is set to "2
rings" or "Toll saver". Select a different setting
(page 67).
R Your unit does not announce caller information while the
other devices such as headset or handsets are engaged
in a call.
R Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to "Manual"
(off) (page 43).
Cause/solution
R Confirm that the mobile phone supports Bluetooth
wireless technology.
R Confirm that the mobile phone supports the Phone Book
Access Profile (PBAP) or Object Push Profile (OPP)
specification.
R If the mobile phone is already connected to another
Bluetooth device such as a Bluetooth headset, turn it off
or disconnect it from the mobile phone.
R Someone is using a mobile line or headset. Try again
later.
R Turn the mobile phone off, then turn it on and try again.
R If an entry is already stored in the unit's phonebook, the
entry cannot be copied even by selecting another group.
R iPhone does not support individual phonebook copy.
Advertisement
Table of Contents
