Table of Contents
Advertisement
Making/Answering Calls Using the Handset
Note:
R To change the recall time, see page 44.
For Call Waiting or Call Waiting
Caller ID service users for
landline calls
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your phone
service provider. This feature allows you to
receive calls while you are already talking on
the phone. If you receive a call while on the
phone, you will hear a call waiting tone. If you
subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller's information is displayed on the base
unit or handset that is in use after you hear the
call waiting tone.
1
Press MCALL WAITN to answer the 2nd
call.
2
To switch between calls, press MCALL
WAITN.
Note:
R Please contact your phone service provider
for details and availability of this service in
your area.
Handset noise reduction
This feature allows you to hear the voice of
the person you are talking to more clearly, by
reducing the surrounding noise coming from
the other party's telephone.
1
Press MMENUN while talking.
2
MbN: "Noise reduction on" or
"Noise reduction off" a
MSELECTN
Note:
R The setting you made is kept for each line
(landline and mobile lines).
The default settings are as follows:
– for landline: "Noise reduction off"
– for mobile lines: "Noise reduction
on"
R Depending on the environment where this
handset is being used, this feature may not
be effective.
22
R This feature is not available while using the
speakerphone.
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
1
Press MMENUN while talking.
2
MbN: "Equalizer" a MSELECTN
3
MbN: Select the desired setting.
4
Press MOKN to exit.
Note:
R The setting you made is kept for each line
(landline and mobile lines).
R Depending on the condition and quality of
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone.
R When both the "Equalizer" setting and
noise reduction are activated,
shown on the display.
Call share
You can join an existing outside call.
n While another unit is on a mobile call:
1
To join the conversation, press
MMOBILEN.
R You can join the conversation when:
– only 1 mobile phone is paired.
– a specific line is set to make
mobile calls (page 19).
2
MbN: Select the corresponding mobile
phone. a MSELECTN
n While another unit is on a landline call:
To join the conversation, press M
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 44).
is
N.
Advertisement
Table of Contents
