Table of Contents
Advertisement
Using Caller ID service
Important:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your phone
service provider for details.
R For all local and national incoming calls,
your display will show the area code (e.g.
09 for Auckland) or the mobile prefix (e.g.
027 for Telecom Mobile) followed by the
caller's telephone number. An Auckland
caller's number will be displayed as
09XXXXXXX. The seven X's represent the
seven digits of the caller's telephone
number. A caller from a 7-digit Telecom
Mobile number will be displayed as
027XXXXXXX. For incoming international
calls, your display may only show "0000".
For business users on a Centrex line, your
display will show Centrex extension
numbers in the shorter extension number
format used within your company.
R The Caller ID information will not be
presented on incoming fax calls if Telecom
FaxAbility is used.
Using toll services from Telecom or
another company
Your telephone company may charge you for
a local call if the number dialled has the area
code prefix included. If this is unacceptable,
dial only the 7-digit local number. Do not dial
the "0" prefix or the area code.
Caller ID features
Handset / Base unit
When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
– "Out of area": The caller dials from
an area which does not provide a Caller
ID service.
Caller ID Service
– "Private caller"
The caller requests not to send caller
information.
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
*1
Handset
*2
Base unit
Missed calls
Handset / Base unit
If a call is not answered, the unit treats it as a
missed call. The display shows "Missed
call".
Note:
R Even when there are unviewed missed
calls, "Missed call" disappears from the
standby display if the following operation is
performed by one of the units:
– A handset is replaced on the base unit
or charger.
– Pressing MOFFN on a handset.
– Pressing MEXITN on the base unit.
Phonebook name display
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in the
caller list.
Talking Caller ID
Handset / Base unit
This feature let you know who is calling by
announcing the caller information.
To use this feature, you must:
– subscribe to a Caller ID service of your
phone service provider.
– turn this feature on (page 43, 46).
– store the name and phone number in the
phonebook (page 34).
Phonebook name announcement
When caller information is received from your
phone service provider and it matches a
*1
/"Private"
*2
:
53
Advertisement
Table of Contents
