Table of Contents
Advertisement
Error messages
Display message
Ask phone
company for
VM access #
Base no power
or
No link. Re-
connect base
AC adaptor.
or
No link.
Busy
Check tel line
Error!!
Failed
Cause/solution
R You have not stored the voicemail access number.
Store the number (page 69).
R Confirm the base unit's AC adaptor is connected to
the unit and the power outlet correctly.
R The handset has lost communication with the base
unit. Move closer to the base unit and try again.
R Unplug the base unit's AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset's registration may have been cancelled.
Re-register the handset (page 51).
R When "No link." is displayed during a power
failure, place a handset on the base unit to supply
power to the base unit.
R No mobile phone is paired to the base unit. Pair a
mobile phone (page 16).
R The called unit is in use.
R Other units are in use and the system is busy. Try
again later.
R The handset you are using is too far from the base
unit. Move closer and try again.
R Only 2 Bluetooth devices can be used with the unit at
the same time (for example, 2 mobile lines, or the
headset and 1 mobile line).
R The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 10).
R If you do not connect the telephone line cord and use
only mobile lines, set the mobile line only mode
(page 18).
R Recording was too short. Try again.
R Someone is using a mobile line or headset. Try
again later.
R The phonebook copy is incomplete (page 57). The
mobile phone is disconnected from the base unit.
Make sure that other Bluetooth devices are not
connected to the mobile phone, and try again.
R Although the unit tried to connect to the mobile
phone or headset, the connection has been failed.
– Someone is using a mobile line or headset. Try
again later.
– Make sure that the mobile phone or headset is not
connected to other Bluetooth devices.
Useful Information
71
Advertisement
Table of Contents
