Panasonic KX-TGF372AZS Operating Instructions Manual page 18

Link to Mobile
Important:
R When 3 Bluetooth devices (2 mobile
phones and 1 headset) are paired to the
base unit, only 2 Bluetooth devices can be
used with the unit at the same time, and the
base unit loses its connection from other
Bluetooth devices. To automatically resume
the connection to Bluetooth devices, leave
the auto connection on.
R Some mobile phones lose connection after
usage, please check the specifications of
your mobile phone for more details.
Handset
1
MMENUN#632
2
MbN: Select the desired setting.
3
MSAVEN a MOFFN
Note:
R Some mobile phones may ask you if you
accept the connection requirement from the
base unit. In that case, select "Off" in step
2. Check the specifications of your mobile
phone.
Connecting/disconnecting the mobile
phone manually
If you will not be using the paired mobile
phone's link to mobile feature temporarily (for
example, you do not want the unit to ring
when your mobile line receives a call), you
can disconnect your mobile phone from the
base unit. If you want to use it again,
reconnect the mobile phone to the base unit.
Note:
R After you disconnect a paired mobile phone
from the base unit manually, it will
automatically be connected to the base unit
in 30 minutes. If you do not use the link to
mobile feature anymore, unpair the mobile
phone (page 17).
R A disconnected mobile phone is not
unpaired from the base unit, so pairing it to
the base unit again is unnecessary.
Handset
1
To connect/disconnect:
For MOBILE 1: MMENUN#6251
For MOBILE 2: MMENUN#6252
18
R A long beep sounds.
2
MOFFN
Mobile line only mode (If you do
not use the landline)
If you do not use the landline, we recommend
setting the unit to the mobile line only mode.
The default setting is "Off".
Important:
R If you turn on the "Mobile line only
mode", disconnect the telephone line cord
from the base unit. Otherwise the "Mobile
line only mode" cannot be activated.
Handset
1
MMENUN#157
2
To turn on:
MbN: "On" a MSELECTN a MbN: "Yes"
a MSELECTN
To turn off:
MbN: "Off" a MSELECTN
Note:
R Once you set this mode, you can use the
following buttons to make mobile calls:
– for the handset, press M
instead of MMOBILEN (page 20).
– for the base unit, press MZN without
pressing MMOBILE 1N or MMOBILE 2N
set for the mobile line selection
(page 19, 26).
R Once you set this mode, the following
features cannot be used:
– Landline features (page 47)
– Answering system (page 62)
Messages cannot be received.
– Voicemail features (page 69)
R After this mode is turned on or off, the base
unit reboots.
– Bluetooth connections from mobile
phones or headset are disconnected. If
the auto connection is turned on
(page 17), the mobile phones are
reconnected.
– will be displayed on the handset
momentarily. The handset can be used
once is displayed.
N or MZN